KONFIGURASI DHCP SERVER

Installing DHCP server in Debian

#apt-get install dhcp3-server

Once you press enter installation will start it will ask you some questions just you need to click ok for all three times

Configuring DHCP server

The main Configuration file for DHCP server is /etc/dhcp3/dhcpd.conf

Before doing any changes take backup copy of this file and add the following lines

option domain-name "test1.com";
option domain-name-servers 192.0.0.1, 194.2.0.50;
option routers 192.0.0.151;
default-lease-time 3600;
subnet 192.0.0.0 netmask 255.255.255.0 {
arrange 192.0.0.200 192.0.0.254;
}

Each one of the above line is explained below

first line provides the name field for the clients, second line gives DNS for for the clients, third one is for router ip,fourth one is lease time fifth line is subnet and netmask details, sixth line is ipaddress range for your clients

If you want more details in dhcpd.conf file check the man page of this file

If you want to configure static ipaddress for some machines follow this

host hostname {
hardware ethernet 00:B0:CF:8B:49:37;
fixed-address 192.0.0.19;
}

Each one of the above line is explained below

First line name of the host you want to configure static ip address,second one is MAC address of that perticular machine,if you want to find the MAC address of that machine you need to run the "ifconfig" command,third one is ipaddress you want to assign to that perticular machine.

You need to restart the DHCP daemon to take effect of your new changes.

#/etc/init.d/dhcp3-server restart

If it restarts without any errors your configuration is correct. If you get any errors you need to check the log files for more error information

#tail /var/log/messages

The following file give you the complete details about the DHCP clients connecting to the DHCP server this details includes the following

IP address of the client machine
MAC address of the client machine
Name of the client machine
Beginning and ending of ipaddress lease time

Client Machine Configuration

You need to modify the following file

# vi /etc/network/interfaces

You need to add the following lines and save the file.

auto lo eth0
iface lo inet loopback
iface eth0 inet dhcp

Now you need to restart the networking service to take these new changes

#/etc/init.d/networking restart

If you want to check your machine is configured properly you need to run the following command

#ifconfig